HP LTE 5000 LTE 5000 Family of Personal Computers Maintenance and Service Guid - Page 216
the puller plate assembly [3]
View all HP LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
To remove the docking mechanism, complete the following steps: 1. Prepare the expansion base for disassembly as described in Section 6.3. 2. Remove the bottom cover assembly as described in Section 6.5. 3. Remove the main board as described in Section 6.8. 4. Remove the screw and washer [1] that connects the docking bar [2] to the puller plate assembly [3] (Figure 6-31). 5. Lift the docking bar [1] and its bushing [2] out of the assembly (Figure 6-32).
To remove the docking mechanism, complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 6.3.
2. Remove the bottom cover assembly as described in Section 6.5.
3. Remove the main board as described in Section 6.8.
4. Remove the screw and washer [1] that connects the docking bar [2] to
the puller plate assembly [3] (Figure 6-31).
5. Lift the docking bar [1] and its bushing [2] out of the assembly
(Figure 6-32).