HP LTE 5000 LTE 5000 Family of Personal Computers Maintenance and Service Guid - Page 42
Running Computer Setup
View all HP LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. Move the jumper on JP1 (Figure 2-1) from pins 2 and 3 to pins 1 and 2. 4. Turn on the computer and run POST. 5. Turn off the computer and move the JP1 jumper to pins 2 and 3 for normal operation. Chapter 2.3 Running Computer Setup The ROM-based Computer Setup displays the current system configuration and allows you to set system and power management parameters. These parameters are stored in CMOS, and a backup copy is saved in a parameter block in system flash ROM. You can access Computer Setup by pressing F10 when the prompt appears after you turn on or restart the computer. The following configuration parameters can be changed in Computer Setup: o Date and time o Power conservation (when)
3. Move the jumper on JP1 (Figure 2-1) from pins 2 and 3 to pins 1 and 2.
4. Turn on the computer and run POST.
5. Turn off the computer and move the JP1 jumper to pins 2 and 3 for
normal operation.
Chapter 2.3 Running Computer Setup
The ROM-based Computer Setup displays the current system configuration and
allows you to set system and power management parameters. These parameters
are stored in CMOS, and a backup copy is saved in a parameter block in
system flash ROM.
You can access Computer Setup by pressing F10 when the prompt appears
after you turn on or restart the computer. The following configuration
parameters can be changed in Computer Setup:
o Date and time
o Power conservation (when)