HP LTE 5000 LTE 5000 Family of Personal Computers Maintenance and Service Guid - Page 250
Power Switch Board, Remove the bottom cover as described
View all HP LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Reverse the above procedure to install the PC Card door assembly. Chapter 7.13 Power Switch Board The bottom cover assembly must be removed before removing the power switch board. The power switch board is installed as a unit with its cable permanently attached. To remove the power switch board, complete the following steps: 1. Prepare the expansion base for disassembly as described in Section 7.3. 2. Remove the bottom cover as described in Section 7.5. 3. Disconnect the power switch board cable and ground wire from the main board (Figure 7-27).
Reverse the above procedure to install the PC Card door assembly.
Chapter 7.13 Power Switch Board
The bottom cover assembly must be removed before removing the power switch
board. The power switch board is installed as a unit with its cable
permanently attached.
To remove the power switch board, complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 7.3.
2. Remove the bottom cover as described in Section 7.5.
3. Disconnect the power switch board cable and ground wire from the main
board (Figure 7-27).