HP LTE Notebook PC 5100 LTE 5000 Family of Personal Computers Maintenance and - Page 179
System Board, Remove the insulator laying on top of the system board if it is damaged
View all HP LTE Notebook PC 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Reverse the above procedure to install a power board. Chapter 5.14 System Board To remove the system board, complete the following steps: 1. Remove the CPU panel as described in Section 5.5.1. 2. Remove the display as described in Section 5.8.1. 3. Remove the processor board as described in Section 5.11. 4. Remove the power board as described in Section 5.13. 5. Remove the insulator laying on top of the system board if it is damaged (Figure 5-56). It is not necessary to remove the insulator to remove the system board but it is an opportune time to inspect and replace the insulator.
Reverse the above procedure to install a power board.
Chapter 5.14 System Board
To remove the system board, complete the following steps:
1. Remove the CPU panel as described in Section 5.5.1.
2. Remove the display as described in Section 5.8.1.
3. Remove the processor board as described in Section 5.11.
4. Remove the power board as described in Section 5.13.
5. Remove the insulator laying on top of the system board if it is damaged
(Figure 5-56). It is not necessary to remove the insulator to remove
the system board but it is an opportune time to inspect and replace the
insulator.