HP LaserJet 9000 HP LaserJet 9000 Series Printer - Getting Started Guide - Page 21

Step 9 Connect power cord, To connect the power cord - warming up

Get HP LaserJet 9000 PDF manuals and user guides View all HP LaserJet 9000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Step 9 Connect power cord This section describes how to connect the power cord. HP recommends connecting the power cord to a surge protector. 1 To connect the power cord 1 Locate the power switch on the front of the printer. Make sure the printer is turned off (out position). Note If the printer is located on top of the 2,000-sheet feeder, do not connect the 2 printer power cord to the convenience receptacle on this device. This connector is designed to connect to the paper output devices with the HP LaserJet 9000 series. 2 Connect the power cord to the printer, a grounded power strip, or an 3 AC outlet. 3 Press the power switch to turn the printer on (in position). After the printer warms up, the READY message should appear on the control panel display. 4 If you have the optional 3,000-sheet 4 stapler/stacker (or stacker), optional Tray 4, or both installed, check that the light on them is solid green. If the light is amber, flashing, or off, see the HP LaserJet 9000 Use manual (supplemental user guide) that can be downloaded from www.hp.com/support/lj9000. ENWW Connect power cord 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
ENWW
Connect power cord
19
Step 9
Connect power cord
This section describes how to connect the power cord. HP
recommends connecting the power cord to a surge protector.
To connect the power cord
1
Locate the power switch on the front
of the printer. Make sure the printer
is turned off (out position).
Note
If the printer is located on top of the
2,000-sheet feeder, do not connect the
printer power cord to the convenience
receptacle on this device. This connector
is designed to connect to the paper
output devices with the HP LaserJet
9000 series.
2
Connect the power cord to the
printer, a grounded power strip, or an
AC outlet.
3
Press the power switch to turn the
printer on (in position). After the
printer warms up, the
READY
message should appear on the
control panel display.
4
If you have the optional 3,000-sheet
stapler/stacker (or stacker), optional
Tray 4, or both installed, check that
the light on them is solid green. If the
light is amber, flashing, or off, see
the
HP LaserJet 9000 Use
manual
(supplemental user guide) that can
be downloaded from
www.hp.com/support/lj9000.
1
2
3
4