HP LaserJet 9055mfp HP LaserJet 9055/9065 mfp - (English) System Administrator - Page 86

• hole pitch: • 2-hole (North America): 70 mm ± 0.5 mm (2.76 ± 0.02 inches) • 3-hole (North America): 108 mm ± 0.5 mm (4.25 ± 0.02 inches) • 4-hole (Europe): 80mm ± 0.5 mm (3.15 ± 0.02 inches) • 4-hole (Sweden): between the 2 middle holes: 70 mm ± 0.5 mm (2.76 ± 0.02 inches); from the top-middle hole to the top hole: 21 mm ± 0.5 mm (0.83 ± 0.02 inches); from the bottom-middle hole to the bottom hole: 21 mm ± 0.5 mm (0.83 ± 0.02 inches) Non-sort mode using primary tray The non-sort mode simply means that the offset-stacker finisher modes are not selected. Copies will be stacked upon exit without being offset between sets. With the primary tray initially selected on the Select finisher mode menu, Q3633A/Q3634A outputs the printed sheets face down in the proper order. ● paper size: Ledger, Legal, Letter-R, Letter, 5.5 by 8.5 ● paper capacity for 20 lb: 500 sheets 5.5 by 8.5 3,000 sheets Letter, Letter-R (Q3633A) 2,500 sheets Letter, Letter-R (Q3634A) 1,500 sheets Ledger, Legal 3 2 1 23 1 CAUTION 1 Touch SORT on the main screen to deselect it, if highlighted. 2 Enter the desired quantity. 3 Position original(s) in the document feeder or on the scanner glass, and make copying selections, as required. 4 Press START to begin copying in non-sort mode. Copies will exit face down, with the page heading toward the front of the MFP. When the selected quantity exceeds the finisher maximum capacity, remove the printed sheets while paper is exiting to avoid paper mishandling. 76 Finisher modes ENWW