Section |
Page |
Theory of operation |
25 |
Basic operation |
26 |
Major print systems |
26 |
Internal components |
27 |
Operating sequence |
31 |
Formatter system |
32 |
Sleep mode |
32 |
Input/output |
32 |
USB |
32 |
Embedded print server |
33 |
Hard-disk |
33 |
CPU |
33 |
Memory |
33 |
Random-access memory |
33 |
Nonvolatile memory |
33 |
DIMM slot |
33 |
PJL overview |
34 |
PML |
34 |
Control panel |
34 |
Engine-control system |
35 |
DC controller PCA |
36 |
Sensors, solenoids, and switches |
37 |
Motors and fans |
38 |
Failure detection |
38 |
Motor failure |
38 |
Fan motor failure |
38 |
Engine power supply |
39 |
Fuser-control circuit |
39 |
Fuser temperature control |
40 |
Low-voltage power supply |
41 |
High-voltage power supply |
42 |
Overcurrent/overvoltage protection |
43 |
Image-formation system |
44 |
Image-formation process |
45 |
Block 1: Latent image formation |
47 |
Step 1: Primary charging |
47 |
Step 2: Laser-beam exposure |
47 |
Block 2: Developing |
48 |
Step 3: Developing |
48 |
Block 3: Transfer |
49 |
Step 4: Transfer |
49 |
Step 5: Separation |
49 |
Block 4: Fusing |
50 |
Step 6: Fusing |
50 |
Block 5: Drum cleaning |
51 |
Step 7: Drum cleaning |
51 |
Step 8: Drum charge elimination |
51 |
Laser/scanner system |
52 |
Laser failure detection |
54 |
Pickup, feed, and delivery system |
55 |
Pickup-and-feed block |
56 |
Fuser/delivery block |
57 |
Pressure roller pressure release control |
57 |
Paper trays |
58 |
Printing from Tray 1 |
58 |
Printing from Tray 2 |
58 |
Cassette media size detection and cassette presence detection |
58 |
Jam detection |
60 |
1x500-sheet paper feeder |
64 |
Pickup-and-feed operation (PF) |
65 |
Cassette lift operation (PF) |
67 |
Cassette media size detection and cassette presence detection (PF) |
67 |
Cassette multiple-feed prevention (PF) |
67 |
Jam detection (PF) |
67 |
1x1500-sheet paper deck |
68 |
Pickup-and-feed operation (PD) |
69 |
Cassette lift operation (PD) |
71 |
Media size detection (PD) |
72 |
Multiple-feed prevention (PD) |
72 |
Jam detection (PF) |
72 |
Envelope feeder |
73 |
Pickup-and-feed operation (EF) |
74 |
Multiple-feed prevention (EF) |
74 |
Multiple-feed detection (EF) |
75 |
Jam detection (EF) |
75 |
Duplexer |
77 |
Motor and fan control (DP) |
78 |
Failure detection (DP) |
79 |
Reverse-and-re-pickup operation (DP) |
79 |
Side registration adjustment operation (DP) |
80 |
Jam detection (DP) |
82 |
Removal and replacement |
83 |
Introduction |
84 |
Removal and replacement strategy |
84 |
Electrostatic discharge |
84 |
Required tools |
85 |
Types of screws |
86 |
Service approach |
87 |
Before performing service |
87 |
After performing service |
87 |
Post-service test |
87 |
Print-quality test |
87 |
Customer replaceable units (CRUs) |
88 |
Print cartridge |
88 |
Tray 2 |
89 |
Tray 2 separation, pickup, and feed rollers |
90 |
Transfer roller |
93 |
Fuser |
94 |
Remove the fuser |
94 |
Formatter cover and formatter cage |
95 |
Installing a new formatter |
97 |
Hard drive |
98 |
Remove the SSM |
98 |
Remove the encrypted HHD |
100 |
Installing a replacement hard drive |
102 |
SSM firmware upgrade |
102 |
HDD firmware upgrade |
103 |
Memory DIMM |
104 |
Remove the memory DIMM |
104 |
Install the memory DIMM |
105 |
Tray 1 pickup and feed rollers |
106 |
Tray 1 separation roller |
109 |
Rear output bin |
111 |
Covers |
112 |
Top-accessory cover |
112 |
Envelope feed accessory covers |
113 |
Duplex accessory or cover |
114 |
Tray 2 extension door |
115 |
Remove the Tray 2 extension door |
115 |
Top cover |
116 |
Remove the top cover |
116 |
Right-side cover |
119 |
Remove the right-side cover |
119 |
Reinstall the right cover |
121 |
Left-side cover |
122 |
Remove the left-side cover |
122 |
Right-front cover |
124 |
Remove the right-front cover |
124 |
Rear-upper cover |
127 |
Remove the rear-upper cover |
127 |
Front cover |
129 |
Remove the front cover |
129 |
Main assemblies |
131 |
Registration assembly |
131 |
Control-panel assembly |
133 |
Remove the control-panel assembly |
133 |
Walk-up USB port and cable |
135 |
Remove the walk-up USB port and cable |
135 |
Inner connecting PCA |
138 |
Remove the inner connecting PCA |
138 |
Reinstall the inner connecting PCA |
140 |
Fan FN102 |
141 |
Remove fan FN102 |
141 |
Fan FN103 |
143 |
Remove fan FN103 |
143 |
Pickup-motor assembly (M101) |
145 |
Remove the pickup-motor assembly |
145 |
Drum-motor assembly (M102) |
147 |
Remove the drum motor |
147 |
Lifter-motor assembly (M103) |
149 |
Remove the lifter motor |
149 |
DC controller PCA |
152 |
Remove the DC controller PCA |
152 |
Reinstallation tip |
153 |
Installing a new formatter and a new DC controller |
153 |
Pickup-drive assembly |
155 |
Remove the pickup-drive assembly |
155 |
Reinstall the pickup-drive assembly |
160 |
Fuser-motor assembly (M299) |
161 |
Remove the fuser-motor assembly |
161 |
Drum-drive assembly |
163 |
Remove the drum-drive assembly |
163 |
Reinstall the drum-drive assembly |
165 |
Fan FN101 |
166 |
Remove fan FN101 |
166 |
Fan FN301 |
168 |
Remove fan FN301 |
168 |
Environmental sensor (TH3) |
170 |
Remove the environmental sensor (TH3) |
170 |
High voltage power supply |
172 |
Remove the high-voltage power-supply assembly |
172 |
Feed-guide assembly |
176 |
Remove the feed-guide assembly |
176 |
Reinstall the feed-guide assembly |
178 |
Tray 1 paper-pickup assembly |
179 |
Remove the Tray 1 pickup assembly |
179 |
Feed-roller assembly |
181 |
Remove the feed-roller assembly |
181 |
Laser/scanner assembly |
182 |
Remove the laser/scanner assembly |
182 |
Paper-delivery assembly |
185 |
Remove the paper-delivery assembly |
185 |
Reinstall the paper-delivery assembly |
188 |
1,500-sheet paper deck (PD) |
189 |
Separation roller (PD) |
189 |
Rear cover (PD) |
191 |
Right-side cover (PD) |
192 |
1,500-sheet paper deck left-side cover |
193 |
Remove the left-side cover |
193 |
Door (PD) |
196 |
Motor (PD) |
198 |
Remove the Motor (PD) |
198 |
Driver PCA (PD) |
200 |
Remove the Driver PCA (PD) |
200 |
Lift-drive assembly (PD) |
202 |
Remove the Lift-drive assembly (PD) |
202 |
Solve problems |
205 |
Solve problems checklist |
206 |
Menu map |
208 |
Preboot menu options |
209 |
Current settings pages |
216 |
Troubleshooting process |
217 |
Determine the problem source |
217 |
Pre-troubleshooting checklist |
217 |
Troubleshooting flowchart |
218 |
Power subsystem |
220 |
Power-on checks |
220 |
Overview |
220 |
Tools for troubleshooting |
223 |
Component diagnostics |
223 |
LED diagnostics |
223 |
Understand lights on the formatter |
223 |
HP Jetdirect LEDs |
224 |
Heartbeat LED |
224 |
Connectivity LED |
224 |
Connectivity LED, product initialization |
225 |
Connectivity LED, product operating |
227 |
Engine diagnostics |
228 |
Engine test button |
228 |
Formatter test |
228 |
Print/Stop test |
229 |
Drum rotation test |
229 |
Paper-path test (and automatic sensor test) |
230 |
Paper path sensors test (automatic) |
230 |
Manual sensor test |
232 |
Top of page sensor (PS103) |
234 |
Pre-feed sensor (PS102) |
235 |
Fuser delivery sensor (PS700) |
236 |
Duplex sensor (PS1502) |
237 |
Media width sensors 1/2 (PS106/108) |
238 |
Output bin full sensor (PS104) |
239 |
Tray 1 paper present sensor (PS105) |
240 |
Tray 2 paper present sensor (PS101) |
241 |
Tray 2 top of stack sensor (PS107) |
242 |
Tray 2 paper size switches (SW102) |
243 |
Tray/Bin manual sensor test |
244 |
Print/stop test |
244 |
Component tests |
245 |
Diagrams |
247 |
Block diagrams |
247 |
Main assemblies |
247 |
Main parts |
248 |
Motors and fans |
249 |
PCAs |
250 |
500-sheet feeder |
250 |
1,500-sheet feeder |
251 |
Connectors |
253 |
DC controller PCA connectors |
253 |
Product base connectors |
255 |
500-sheet paper tray connectors |
256 |
1,500-sheet paper tray connectors |
256 |
Duplexer connectors |
257 |
Envelope feeder connectors |
257 |
General timing chart |
258 |
Circuit diagrams |
259 |
Internal print-quality test pages |
265 |
Print-quality-troubleshooting pages |
265 |
Clean the paper path |
266 |
Set up an auto cleaning page |
266 |
Print configuration page |
267 |
Configuration page |
267 |
HP embedded Jetdirect page |
269 |
Print quality troubleshooting tools |
270 |
Repetitive image defect ruler |
270 |
Control-panel menus |
271 |
Retrieve Job from USB menu |
271 |
Retrieve Job from Device Memory menu |
271 |
Supplies menu |
272 |
Trays menu |
273 |
Administration menu |
274 |
Reports menu |
274 |
General Settings menu |
274 |
Retrieve From USB Settings menu |
277 |
General Print Settings menu |
277 |
Default Print Options menu |
279 |
Display Settings menu |
279 |
Manage Supplies menu |
280 |
Manage Trays menu |
281 |
Stapler/Stacker Settings menu |
282 |
Multi-Bin Mailbox Settings menu |
282 |
Network Settings menu |
283 |
Troubleshooting menu |
287 |
Device Maintenance menu |
288 |
Backup/Restore menu |
288 |
Calibrate/Cleaning menu |
288 |
USB Firmware Upgrade menu |
289 |
Service menu |
289 |
Interpret control-panel messages, status-alert messages, and event code errors |
290 |
10.00.33 |
290 |
10.00.35 |
290 |
10.00.60 |
290 |
10.00.69 |
291 |
10.00.91 |
291 |
10.0X.Y0 Supply memory error |
291 |
10.23.35 |
292 |
10.23.50 |
292 |
10.23.51 |
292 |
10.23.52 |
292 |
10.23.60 |
292 |
10.23.70 Printing Past Very Low |
293 |
10.26.15 |
293 |
10.26.50 |
293 |
10.26.60 |
294 |
10.XX.34 Used Supply In Use |
294 |
10.XX.40 Genuine HP Supplies Installed |
294 |
10.XX.41 Unsupported Supply In Use |
295 |
10.XX.70 Printing past very low |
295 |
10.YY.15 Install <supply> |
295 |
10.YY.35 Incompatible <supply> |
296 |
11.00.YY Internal clock error |
296 |
13.00.00 |
296 |
13.00.EE |
297 |
13.A3.FF |
297 |
13.D3.DZ |
297 |
13.E5.FF |
297 |
13.EA.EE |
298 |
13.EE.FF |
298 |
13.FF.EE |
298 |
13.FF.FF |
298 |
13.WX.EE |
298 |
13.WX.FF |
299 |
13.WX.YZ Fuser Area Jam |
299 |
13.WX.YZ Fuser wrap jam |
299 |
13.WX.YZ Jam below control panel |
299 |
13.WX.YZ Jam in Tray 1 |
299 |
13.WX.YZ Jam in Tray <X> |
300 |
13.WX.YZ Jam inside envelope feeder |
300 |
13.WX.YZ Jam inside top cover |
300 |
14.00.XX |
300 |
20.00.00 Insufficient memory: <Device> To continue, touch “OK” |
301 |
21.00.00 Page Too Complex |
301 |
32.08.AX |
301 |
32.1C.XX |
302 |
32.21.00 |
308 |
33.01.XX |
309 |
33.XX.YY Used board/disk |
309 |
40.00.01 USB I/O buffer overflow To continue, touch “OK” |
309 |
40.00.02 Embedded I/O buffer overflow To continue, touch “OK” |
309 |
40.00.05 Embedded I/O bad transmission To continue, touch “OK” |
310 |
41.02.00 Error |
310 |
41.03.YZ Unexpected size in envelope feeder To use another tray, touch \ |
310 |
41.03.YZ Unexpected size in tray <X> |
311 |
41.05.YZ Unexpected type in tray <X> |
312 |
41.XX.YZ Error To continue, touch “OK” |
314 |
42.XX.YY |
315 |
47.00.XX |
315 |
47.01.XX |
315 |
47.02.XX |
316 |
47.03.XX |
316 |
47.04.XX |
316 |
47.05.00 |
316 |
47.06.XX |
316 |
47.WX.YZ Printer Calibration Failed To continue, touch “OK” |
317 |
49.XX.YY To continue turn off then on |
318 |
50.WX.YZ Fuser error To continue turn off then on |
318 |
51.00.YY Error |
320 |
52.XX.00 Error To continue turn off then on |
320 |
54.XX.YY Error |
321 |
55.00.YY DC controller error To continue turn off then on |
322 |
55.0X.YY DC controller error To continue turn off then on |
322 |
56.00.YY Error To continue turn off then on |
322 |
57.00.0Y Error To continue turn off then on |
323 |
58.00.0Y Error To continue turn off then on |
324 |
59.00.YY error To continue turn off then on |
324 |
59.A2.0x Error |
325 |
60.00.0Y Tray <Y> lifting error |
326 |
62.00.00 No system To continue turn off then on |
326 |
65.X0.A1 Output accessory disconnected |
327 |
66.80.YY Stapler/Stacker failure |
327 |
69.11.YY Error To continue turn off then on |
329 |
70.00.00 Error To continue turn off then on |
329 |
79.XX.YY Error To continue turn off then on |
330 |
80.0X.YY Embedded JetDirect error |
330 |
81.YY.ZZ EIO-1 Card Failure |
332 |
82.73.46 OR 82.73.47 |
333 |
98.00.01 Corrupt data in firmware volume |
334 |
98.00.02 Corrupt data in solutions volume |
334 |
98.00.03 Corrupt data in configuration volume |
334 |
98.00.04 Corrupt data in job data volume |
334 |
99.00.01 Upgrade not performed file is corrupt |
335 |
99.00.02 Upgrade not performed timeout during receive |
335 |
99.00.03 Upgrade not performed error writing to disk |
335 |
99.00.04 Upgrade not performed timeout during receive |
335 |
99.00.05 Upgrade not performed timeout during receive |
336 |
99.00.06 Upgrade not performed error reading upgrade |
336 |
99.00.07 Upgrade not performed error reading upgrade |
336 |
99.00.08 Upgrade not performed error reading upgrade |
336 |
99.00.09 Upgrade canceled by user |
337 |
99.00.10 Upgrade canceled by user |
337 |
99.00.11 Upgrade canceled by user |
337 |
99.00.12 Upgrade not performed the file is invalid |
337 |
99.00.13 Upgrade not performed the file is invalid |
338 |
99.00.14 Upgrade not performed the file is invalid |
338 |
99.00.2X |
338 |
99.09.60 Unsupported disk |
339 |
99.09.61 Unsupported disk |
339 |
99.09.62 Unknown disk |
339 |
99.09.63 Incorrect disk |
340 |
99.09.64 Disk malfunction |
340 |
99.09.65 Disk data error |
340 |
99.09.66 No disk installed |
340 |
99.09.67 Disk is not bootable please download firmware |
340 |
99.XX.YY |
341 |
<binname> full Remove all paper from bin |
341 |
<Supply> low OR Supplies low |
341 |
<Supply> very low OR Supplies very low |
342 |
[File System] device failure To clear press “OK” |
342 |
[File System] file operation failure To clear press “OK” |
342 |
[File System] file system is full To clear press “OK” |
342 |
[File System] is not initialized |
343 |
[File System] is write protected |
343 |
Accept bad signature |
343 |
Bad optional tray connection |
343 |
Canceling |
344 |
Canceling... <jobname> |
344 |
Cartridge Low |
344 |
Cartridge Memory Abnormal |
344 |
Cartridge Out |
344 |
Checking engine |
345 |
Checking paper path |
345 |
Chosen personality not available To continue, touch “OK” |
345 |
Cleaning do not grab paper |
345 |
Cleaning... |
346 |
Clearing event log |
346 |
Clearing paper path |
346 |
Close stapler/stacker multi bin mailbox door |
346 |
Close top cover |
346 |
Cooling device |
347 |
Creating cleaning page... |
347 |
Data received To print last page press “OK” |
347 |
Event log is empty |
347 |
Expected drive missing |
348 |
External device initializing |
348 |
Face Down Tray Full |
348 |
FIM Load Error Send full FIM on <X> port |
348 |
Fuser Kit low |
348 |
Fuser Kit very low To continue, touch “OK” |
349 |
Genuine HP cartridge installed |
349 |
Genuine HP supply installed |
349 |
HP Secure hard drive disabled |
349 |
Incompatible <supply> |
350 |
Incompatible supplies |
350 |
Initializing... |
350 |
Install fuser unit |
350 |
Install supplies |
351 |
Install supply |
351 |
Internal disk device failure To clear press “OK” |
351 |
Internal disk file operation failed |
351 |
Internal disk file system is full |
352 |
Internal disk is write protected |
352 |
Internal disk not found |
352 |
Internal disk not functional |
352 |
Internal disk not initialized |
352 |
Internal disk spinning up |
353 |
Job not stapled due to mixed sizes |
353 |
Load Tray <X>: [Type], [Size] |
353 |
Load Tray <X>: [Type], [Size] To use another tray, press “OK” |
354 |
Loading program <XX> |
354 |
Manually feed output stack Then touch \ |
354 |
Manually feed: <Type><Size> |
354 |
Manually feed: <Type><Size> To use another tray, press “OK” |
355 |
Moving solenoid |
355 |
Moving solenoid and motor |
355 |
No job to cancel |
355 |
NON HP SUPPLY INSTALLED |
356 |
Output Bin Full |
356 |
Paused… |
356 |
Performing Paper Path Test… |
356 |
Please Wait... |
356 |
Printing Configuration... |
357 |
Printing Event Log... |
357 |
Printing File Directory... |
357 |
Printing Font List... |
357 |
Printing Fuser Test Page... |
357 |
Printing Help Page... |
358 |
Printing Menu Map... |
358 |
Printing Registration Page… |
358 |
Printing stopped |
358 |
Printing Supplies Status Page... |
358 |
Printing Usage Page... |
358 |
Printing…engine test |
359 |
Processing duplex job Do not grab paper until job completes |
359 |
Processing job from tray <X>... Do not grab paper until job completes |
359 |
Processing... |
359 |
Processing... copy <X> of <Y> |
359 |
RAM disk device failure To clear press “OK” |
360 |
RAM disk file operation failed To clear press “OK” |
360 |
RAM disk file system is full To clear press “OK” |
360 |
RAM disk is write protected To clear press “OK” |
360 |
RAM disk not initialized |
360 |
Ready |
361 |
Ready <IP Address> |
361 |
Receiving Upgrade |
361 |
Remove one print cartridge |
361 |
Remove USB accessory |
361 |
Replace <supply> |
362 |
Replace supplies |
362 |
Resend external accessory firmware |
363 |
Resend Upgrade |
363 |
Restore Factory Settings |
363 |
ROM disk device failed To clear press “OK” |
363 |
ROM disk file operation failed To clear press “OK” |
363 |
ROM disk file system is full To clear press “OK” |
364 |
ROM disk is write protected To clear press “OK” |
364 |
ROM disk not initialized To clear press “OK” |
364 |
Rotating Motor |
364 |
Size Mis-Match |
364 |
Size mismatch in Tray <X> |
365 |
Sleep mode on |
365 |
Staple Cartridge low |
365 |
Staple Cartridge very low |
365 |
Stapler/Stacker staple jam |
366 |
Supplies low |
366 |
SUPPLY MEMORY WARNING |
366 |
The unit has corrupt data |
366 |
Tray <X> empty: [Type], [Size] |
367 |
Tray <X> lifting |
368 |
Tray <X> open |
368 |
Tray <X> overfilled |
369 |
Type mismatch Tray |
369 |
Unsupported drive installed To continue, touch “OK” |
369 |
Unsupported supply in use OR Unsupported supply installed To continue, touch “OK” |
370 |
Unsupported tray configuration |
370 |
Unsupported USB accessory detected Remove USB accessory |
370 |
Upgrade Error |
370 |
USB accessory not functional |
371 |
USB hubs are not fully supported Some operations may not work properly |
371 |
USB is write protected To clear press “OK” |
371 |
USB needs too much power |
371 |
USB needs too much power Remove USB and Then Turn Off then On |
371 |
USB not initialized |
372 |
USB storage accessory removed Clearing any associated data |
372 |
USB storage device failure To clear press “OK” |
372 |
USB storage file operation failed To clear press “OK” |
372 |
USB storage file system is full To clear press “OK” |
372 |
Used supply installed To continue, touch “OK” OR Used supply in use |
373 |
Waiting for tray <X> to lift |
373 |
Windows Login Required to Use this Feature |
373 |
Event-log messages |
374 |
Print an event log |
375 |
View an event log |
376 |
Clear an event log |
376 |
Clear jams |
377 |
Jam locations |
378 |
Common causes of jams |
379 |
Clear jams from the input trays |
380 |
Clear jams from Tray 1 |
380 |
Clear jams from Tray 2 or an optional 500-sheet tray |
380 |
Clear jams from the optional 1,500-sheet tray |
381 |
Clear jams from the optional duplexer |
383 |
Clear jams from the optional envelope feeder |
385 |
Clear jams from the output areas |
387 |
Clear jams from the rear output bin |
387 |
Clear jams from the optional stacker or stapler/stacker |
388 |
Clear paper jams from the optional stacker or stapler/stacker |
388 |
Clear staple jams from the optional stapler/stacker |
389 |
Clear jams from the optional 5-bin mailbox |
391 |
Clear jams from the fuser |
393 |
Clear jams from the print-cartridge (top cover) |
397 |
Change jam recovery |
399 |
Paper does not feed automatically |
400 |
The product does not pick up paper |
400 |
The product picks up multiple sheets of paper |
400 |
Prevent paper jams |
400 |
Use manual print modes |
402 |
Solve image-quality problems |
404 |
Print-quality examples |
404 |
Clean the product |
412 |
Clean the paper path |
412 |
Set up an auto cleaning page |
412 |
Solve performance problems |
413 |
Solve connectivity problems |
414 |
Solve direct-connect problems |
414 |
Solve network problems |
414 |
Service mode functions |
415 |
Service menu |
415 |
Product resets |
416 |
Restore factory-set defaults |
416 |
Clean Disk and Partial Clean functions |
417 |
Active and repository firmware locations |
417 |
Partial Clean |
418 |
Execute a Partial Clean |
418 |
Clean Disk |
419 |
Execute a Clean Disk |
419 |
Product updates |
421 |
Determine the installed revision of firmware |
421 |
Perform a firmware upgrade |
421 |
Embedded Web Server |
421 |
USB storage device (Preboot menu) |
422 |
USB storage device (control-panel menu) |
423 |
Parts and diagrams |
425 |
Order parts by authorized service providers |
426 |
Order parts, accessories, and supplies |
426 |
Supplies part numbers |
426 |
Customer-self repair parts |
426 |
Accessories part numbers |
428 |
Related documentation and software |
429 |
How to use the parts lists and diagrams |
430 |
Assembly locations |
431 |
Base product (no optional trays or accessories) |
431 |
Covers |
434 |
Product base |
434 |
Internal components |
436 |
Internal components (1 of 3) |
436 |
Internal components (2 of 3) |
438 |
Internal components (3 of 3) |
440 |
High-voltage power supply |
442 |
Cassette (Tray 2) |
444 |
Cassette (custom media) |
446 |
Paper feed roller assembly |
448 |
Registration assembly |
450 |
Tray 1 (MP) pickup assembly |
452 |
Paper delivery assembly |
454 |
Fuser assembly |
456 |
PCAs (product base) |
458 |
Input devices |
460 |
1x500-sheet feeder |
460 |
Covers (1x500) |
460 |
Main body (1x500) |
462 |
Cassette (1x500) |
464 |
PCA (1x500) |
466 |
1x1500-sheet paper deck |
468 |
Covers (1x1500) |
468 |
Front door assembly (1x1500) |
470 |
Main body (1x500; 1 of 2) |
472 |
Main body (1x500; 2 of 2) |
474 |
Paper pickup assembly (1x500) |
476 |
PCA (1x1500) |
478 |
Duplexer |
480 |
Main body (duplexer) |
480 |
PCA (duplexer) |
482 |
Envelope feeder |
484 |
Covers (envelope feeder) |
484 |
Main body (1 of 2; envelope feeder) |
486 |
Main body (2 of 2; envelope feeder) |
488 |
PCA (envelope feeder) |
490 |
Output devices |
492 |
Stapler/stacker multi-bin mailbox (MBM) |
492 |
Covers (MBM) |
492 |
Main body (MBM) |
494 |
Main body (MBM; 1 of 2) |
494 |
Main body (MBM; 2 of 2) |
496 |
PCA (MBM) |
498 |
Stacker and Stapler/Stacker (S and S/S) |
500 |
Covers (S and S/S) |
500 |
Main body (SS) |
502 |
Main body (S) |
504 |
Middle assemblies (S and S/S) |
506 |
Stapler/Stacker middle assembly (1 of 2; S/S) |
506 |
Stapler/Stacker middle assembly (2 of 2; S/S) |
508 |
Stacker middle assembly (1 of 2; S) |
510 |
Stacker middle assembly (2 of 2; S) |
512 |
PCA (S and S/S) |
514 |
Alphabetical parts list |
516 |
Numerical parts list |
525 |
Service and support |
535 |
Hewlett-Packard limited warranty statement |
536 |
HP's Premium Protection Warranty: LaserJet print cartridge limited warranty statement |
538 |
Data stored on the print cartridge |
539 |
End User License Agreement |
540 |
Customer self-repair warranty service |
543 |
Customer support |
544 |
Repack the product |
545 |
Product specifications |
547 |
Physical specifications |
548 |
Power consumption, electrical specifications, and acoustic emissions |
548 |
Operating environment |
549 |
Regulatory information |
551 |
FCC regulations |
552 |
Environmental product stewardship program |
553 |
Protecting the environment |
553 |
Ozone production |
553 |
Power consumption |
553 |
Toner consumption |
553 |
Paper use |
553 |
Plastics |
553 |
HP LaserJet print supplies |
554 |
Return and recycling instructions |
554 |
United States and Puerto Rico |
554 |
Multiple returns (more than one cartridge) |
554 |
Single returns |
554 |
Shipping |
554 |
Residents of Alaska and Hawaii |
555 |
Non-U.S. returns |
555 |
Paper |
555 |
Material restrictions |
555 |
Disposal of waste equipment by users in private households in the European Union |
556 |
Chemical substances |
556 |
Material Safety Data Sheet (MSDS) |
556 |
For more information |
556 |
Declaration of Conformity |
558 |
Certificate of Volatility |
560 |
Types of memory |
560 |
Volatile memory |
560 |
Non-volatile memory |
560 |
Hard-disk-drive memory |
560 |
Safety statements |
561 |
Laser safety |
561 |
Canadian DOC regulations |
561 |
VCCI statement (Japan) |
561 |
Power cord instructions |
561 |
Power cord statement (Japan) |
561 |
EMC statement (China) |
562 |
EMC statement (Korea) |
562 |
EMI statement (Taiwan) |
562 |
Product Stability |
562 |
Laser statement for Finland |
562 |
GS statement (Germany) |
563 |
Substances Table (China) |
564 |
Restriction on Hazardous Substances statement (Turkey) |
564 |