HP LaserJet M4349 HP LaserJet M4349x MFP - User Guide - Page 190
Control-panel messages continued, Control panel message, Description, Recommended action
View all HP LaserJet M4349 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Table 11-1 Control-panel messages (continued) Control panel message Description Recommended action 41.3 MEDIA TOO SHORT CANNOT SEND TO FACE DOWN OUTPUT BIN The MFP cannot deliver the selected media Select the face-up output option, or load a face-down because the media does not meet longer-size media in the tray. Resend the job. the minimum length specification. See Select print media on page 72. 41.3 UNEXPECTED SIZE IN TRAY XX LOAD TRAY XX This is typically caused if two or more sheets of media stick together in the MFP or if the tray is not adjusted correctly. Reload the tray with the correct media size. Reconfigure the size in a tray so that the MFP will use a tray that contains the size required for the print job. Follow the instructions in the onscreen dialog box. 41.3 UNEXPECTED SIZE IN TRAY XX To use another tray touch OK The specified tray is loaded with media that is longer or shorter in the feed direction than the size adjusted for the tray. Touch OK to use another tray. Reconfigure the size in a tray so that the MFP will use a tray that is loaded with the size of media required for the print job. If the message does not clear automatically from the control-panel display, turn the MFP off, and then turn the MFP on. 41.X ERROR To continue touch OK A temporary printing error occurred. Touch OK to clear the error. If the error is not cleared, turn the MFP off, and then turn the MFP on. If this message persists, contact your dealer for support, or go to www.hp.com/support/ ljm4349mfp. 49.XXXXX ERROR To continue turn off then on A critical firmware error has occurred. Remove third-party devices. Turn the MFP off, and then turn the MFP on. If this message persists, contact your dealer for support, or go to www.hp.com/support/ ljm4349mfp. 50.X FUSER ERROR A fuser error has occurred. Make sure you have the correct fuser. Reseat the fuser. Turn the MFP off, and then turn the MFP on. If this message persists, contact your dealer for support, or go to www.hp.com/support/ ljm4349mfp. 51.XY ERROR To continue turn off then on A temporary printing error has occurred. Turn the MFP off, and then turn the MFP on. If this message persists, contact your dealer for support, or go to www.hp.com/support/ ljm4349mfp. 52.XY ERROR To continue turn off then on A temporary printing error has occurred. Turn the MFP off, and then turn the MFP on. If this message persists, contact your dealer for support, or go to www.hp.com/support/ ljm4349mfp. 53.XY.ZZ CHECK RAM DIMM SLOT To continue touch OK A problem exists with the MFP memory. The DIMM that caused the error will not be used. The following are the values of X: X = Device location 0 = Onboard memory 1 = Slot 1 You might need to reseat or replace the specified DIMM. Turn the MFP off, and then replace the DIMM that caused the error. See Adding printer memory on page 249. If this message persists, contact your dealer for support, or go to www.hp.com/support/ ljm4349mfp. 176 Chapter 11 Problem solving ENWW