HP LaserJet M5000 HP LaserJet MFP - Analog Fax Accessory Guide - Page 39
Installing/replacing the fax accessory in the HP LaserJet M9040 MFP / M9050 MFP,
View all HP LaserJet M5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
16. Locate the phone cord that is included with the fax accessory kit. Connect one end of the phone cord into the fax accessory phone jack that is on the formatter. Push the connector until you hear a click. Figure 1-42 Connecting the phone cord 17. Connect the other end of the phone cord into the phone jack on the wall. Push the connector until you hear a click or until the connector is securely seated. Because there are different types of connectors, depending on the country/region, the connector might make an audible click when connected or might not make an audible click. Installing/replacing the fax accessory in the HP LaserJet M9040 MFP / M9050 MFP Use this procedure to install the analog fax accessory in the HP LaserJet M9040 MFP / M9050 MFP. 1. Slide the optional output device away from the print engine. Figure 1-43 Sliding away the output device 2. Turn off the MFP, and then disconnect the power cord and all cables. Figure 1-44 Turning the power off and disconnecting cables ENWW Installing the fax accessory 31