HP LaserJet M9040/M9050 Service Manual - Page 58
Device Behavior menu continued
View all HP LaserJet M9040/M9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Table 2-14 Device Behavior menu (continued) Menu item Submenu item Submenu item General Printing Behavior Override A4/Letter Manual Feed Edge-To-Edge Override Courier Font Wide A4 Print PS Errors Print PDF Errors Personality Values No Yes (default) Enabled Disabled (default) Enabled Disabled (default) Regular (default) Dark Enabled Disabled (default) Enabled Disabled (default) Enabled (default) Disabled Auto (default) PCL PDF PS Description Use this feature to print on letter-size paper when an A4 job is sent but no A4-size paper is loaded in the product (or to print on A4 paper when a letter-size job is sent but no letter-size paper is loaded). This option will also override A3 with ledger-size paper and ledger with A3-size paper. When this feature is enabled, the user can select manual feed from the control panel as the paper source for a job. Use the feature to turn the edge-to-edge mode on or off for all print jobs. This mode can be overridden inside a print job by an edge-to-edge PJL variable. Use this feature to select which version of the Courier font you want to use. Use this feature to change the printable area of A4-size paper. If you enable this option, eighty 10-pitch characters can be printed on a single line of A4 paper. Use this feature to select whether a postscript (PS) error page is printed when the product encounters a PS error. Use this feature to select whether a PDF error page is printed when the product encounters a PDF error. Select the printer language that the product should use. Normally you should not change the language. If you change the setting to a specific language, the product does not automatically switch from one language to another unless specific software commands are sent to the product. 40 Chapter 2 Control panel ENWW