HP LaserJet P4015 HP LaserJet P4010 and P4510 Series - User Guide - Page 164

Table 10-1 Control-panel messages (continued) Control panel message Description alternates with DATE/TIME=YYYY/MMMM/DD HH:MM The current date and time. Press OK to continue Recommended action Set the date and time or press the stop button to skip. To skip press . Deleting... Product is deleting a stored job. No action is necessary. DUPLEXER ERROR REMOVE DUPLEXER The optional duplexer has an error. Install duplexer with power off Turn off the product and reattach the optional duplexer. (Any print jobs at the product might be lost.) EIO DISK NOT FUNCTIONAL The EIO disk in slot X is not working correctly. 1. Turn the product off. For help press 2. Make sure the EIO disk is inserted correctly and securely fastened. 3. If the control panel message continues to appear, the optional hard disk needs to be replaced. EIO DISK SPINNING UP alternates with The disk accessory in EIO slot [X] is initializing. No action is necessary. EIO DEVICE FAILURE The specified device has failed. Press OK to continue. To clear press OK EIO FILE OPERATION FAILED A command attempted an illogical operation. Press OK to continue. To clear press OK EIO FILE SYSTEM IS FULL To clear press OK The specified file system is full and cannot be Press OK to continue. written to. EIO IS WRITE PROTECTED The file system cannot be written to. Press OK to continue. To clear press OK Envelope Feeder [Type] [Size] To change size or type press OK alternates with Current size and type of tray. To accept the size and type, press the back arrow . To change settings, press OK. TRAY [TYPE] [SIZE] For help press ENVELOPE FEEDER EMPTY The envelope feeder is empty. Load envelopes in the envelope feeder. alternates with Event log empty You are attempting to view an empty event No action is necessary. log by selecting SHOW EVENT LOG from the control panel. 152 Chapter 10 Solve problems ENWW