HP LaserJet Pro M1210 HP LaserJet M1130/M1210 MFP User Guide - Page 34

Network config. menu, Table 2-9

Page 34 highlights

Table 2-9 Network config. menu Menu item Sub-menu item TCP/IP Config Automatic Manual Link Speed Network Services Automatic (default) 10T Full 10T Half 100TX Full 100TX Half IPv4 IPv6 Show IP address No Yes Restore Defaults Description Select the Automatic option to automatically configure all the TCP/IP settings. Select the Manual option to manually configure the IP address, subnet mask, and default gateway. The default setting is Automatic. Sets the link speed manually if needed. After setting the link speed, the product automatically restarts. This item is used by the network administrator to limit the network services available on this product. On Off The default setting for all items is On. No: The product IP address will not appear on the control-panel display. Yes: The product IP address will appear on the control-panel display, alternating between supplies information and the product IP address. The IP address will not be displayed if an error condition exits. The default setting is No. Press the OK button to restore the network configuration settings to the default values. 20 Chapter 2 Control panel menus (M1210 Series only) ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266

Table 2-9
Network config. menu
Menu item
Sub-menu item
Description
TCP/IP Config
Automatic
Manual
Select the
Automatic
option to automatically
configure all the TCP/IP settings.
Select the
Manual
option to manually configure the
IP address, subnet mask, and default gateway.
The default setting is
Automatic
.
Link Speed
Automatic
(default)
10T Full
10T Half
100TX Full
100TX Half
Sets the link speed manually if needed.
After setting the link speed, the product automatically
restarts.
Network Services
IPv4
IPv6
This item is used by the network administrator to limit
the network services available on this product.
On
Off
The default setting for all items is
On
.
Show IP address
No
Yes
No
: The product IP address will not appear on the
control-panel display.
Yes
: The product IP address will appear on the
control-panel display, alternating between supplies
information and the product IP address. The IP
address will not be displayed if an error condition
exits.
The default setting is
No
.
Restore Defaults
Press the
OK
button to restore the network
configuration settings to the default values.
20
Chapter 2
Control panel menus (M1210 Series only)
ENWW