HP LaserJet Pro MFP M25-M27 User Guide - Page 76
Solve problems, Control-panel light patterns continued
View all HP LaserJet Pro MFP M25-M27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Table 8-2 Control-panel light patterns (continued) Light status Error code Attention light is blinking. E0 E1 E2 E4 E5 H0 H1 The attention and toner lights E3 are blinking. State of the product Action Paper is jammed in the printer. Clear the jam. The input tray is empty. Load the tray. A door is open. Verify that the toner-cartridge door is fully closed. The toner cartridge is very low. Press the Start Copy button to continue or replace the toner cartridge. The toner cartridge is very low. Replace the toner cartridge. The printer is in manual-feed mode. Load the correct paper type and size into the input tray. Press the Start Copy button to continue. The printer is processing a manual duplex job. Load the pages into the input tray to print the second sides. Press the Start Copy button to continue. The toner-cartridge is missing or Install the toner-cartridge. is not installed correctly. The toner light is on. The attention and ready lights E6 are on. E7 E8 E9 68 Chapter 8 Solve problems The toner-cartridge has reached the end of its estimated useful life. When the supply has reached this condition, the HP Premium Protection warranty for that supply has ended. You do not need to replace the toner-cartridge at this time unless print quality is no longer acceptable. The printer has experienced a 1. Turn off the printer or fatal error from which it cannot disconnect the power cord recover. from the printer. 2. Wait 30 seconds, and then turn on the printer or reconnect the power cord to the printer. 3. Wait for the printer to initialize. If the error persists, contact HP customer support. ENWW