HP LaserJet Pro MFP M428-M429 User Guide - Page 88
Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server, Step one: Access the HP Embedded Web Server (EWS), Step two: Con the Scan to Network Folder feature
View all HP LaserJet Pro MFP M428-M429 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server Use the HP Embedded Web Server (EWS) to set up the Scan to Network Folder feature. This method is available for all supported operating systems. ● Step one: Access the HP Embedded Web Server (EWS) ● Step two: Configure the Scan to Network Folder feature Step one: Access the HP Embedded Web Server (EWS) Locate the printer's IP address and then enter it into a Web browser to access the EWS. Your printer must be connected to an IP-based network before you can access the EWS. 1. From the Home screen on the printer control panel, touch the Wireless icon or the Ethernet icon to view the printer's IP address or host name. 2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. Step two: Configure the Scan to Network Folder feature Use the Embedded Web Server (EWS) interface to set up the Scan to Folder feature. 1. On the Settings tab in the EWS, click Control Panel Customization, and then click Quick Sets. 2. Click (Add), for Type select Scan to Network Folder, and follow the onscreen instructions for adding a Quick Set profile for a network folder. When finished, click Next. 3. In this page, follow the onscreen instructions for setting up the network folder, authentication requirements, and scan and file configurations. When finished, click Apply. 4. In the settings page, follow the onscreen instructions for configuring scan settings, such as paper size and scan resolution. When finished, click Save. NOTE: You can change the default scan and file settings for future Scan to Network Folder Quick Sets. In the EWS, click the Scan tab, click Scan to Network Folder, and then click Default Settings. 76 Chapter 6 Scan ENWW