HP Latex 3600 Introductory Information 4 - Page 5

English • The LED's array supports, beam and enclosures can reach high temperatures. To avoid the risk of fire, take the following precautions: --Take special care with zones marked with warning labels. --Do not place objects covering LED's arrays supports, beam and enclosures. --Take care not to spill liquid on the accessory. After cleaning, make sure all components are dry before using the printer. --Do not attempt to modify LED's array supports, beam and enclosures; Heat Hazard The drying and curing subsystems of the printer operate at high temperatures and can cause burns if touched. LED's array (oprional) supports , beam and enclosures can reach high temperatures. To avoid the risk of burns, take the following precautions: • Do not touch the internal enclosures of the printer's drying and curing modules and vapor removal thermal blankets. • Take special care when accessing the substrate path. • Take special care with zones marked with warning labels. • Do not place objects covering LED's arrays supports, beam and enclosures. • Do not attempt to modify LED's array supports, beam and enclosures; • Remember to let the printer cool down before performing some maintenance operations. Mechanical hazard The printer has moving parts that could cause injury. To avoid personal injury, take the following precautions when working close to the printer and in-line slitters: • Keep your clothing and all parts of your body away from the printer's moving parts. • Avoid wearing necklaces, bracelets and other hanging objects. • If your hair is long, try to secure it so that it will not fall into the printer. • Take care that sleeves or gloves do not get caught in the printer's moving parts. • Avoid standing close to the fans, which could cause injury and could also affect print quality (by obstructing the air flow). • Do not touch gears or moving rolls during printing. • Do not operate the printer with covers bypassed. • Do not touch in-line slitters during printing. • Handle in-line slitters with care and store them safely into their box when not used with the printer. • Risk of cutting your fingers! Uninstall the In-line slitters when manipulating the curing module or accessing the substrate path. • Take care when using the air gun. When used for cleaning purposes, make sure to use it according to the local regulations since additional safety provisions may apply. Light radiation hazard UV radiation can be emitted from the LED's array in compliance with the requirements of the exempt group of IEC 62471:2006 Photobiological safety of lamps and lamp systems. However, you are recommended not to look directly for a long time at the output LEDs lights while they are on. Sound pressure level The sound pressure level could exceed 70 dBA in some print modes. Hearing protection may be required. Heavy substrate hazard Special care must be taken to avoid personal injury when handling heavy substrates. • Handling heavy substrate rolls always requires two people. Care must be taken to avoid back strain and/or injury. • Always use a forklift, pallet truck, or other handling equipment to lift substrates. The printer has been designed to be compatible with many of these devices. • Always wear personal protective equipment including boots and gloves. Ink handling and condensates HP recommends that you wear gloves when handling ink system components and condensates. Ventilation and air conditioning As with all equipment installations, to maintain ambient comfort levels, air conditioning and ventilation in the work area should take into account that the printer produces heat. Air conditioning and ventilation should meet local environmental, health, and safety (EHS) guidelines and regulations. For a more prescriptive approach to adequate ventilation, refer to the ANSI/ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) 62.1-2013 Ventilation for Acceptable Indoor Air Quality. An example Introductory Information 3