HP Latex R1000 Site Preparation Guide - Page 26
Shipment items, Tools and manpower required for installation, Moving equipment
View all HP Latex R1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Shipment items All printer components will arrive in a single crate. The dimensions and weight of the crate and printer are as follows: Printer and crate physical specifications Width Depth Height Weight Crate (printer inside) Printer Crate (printer inside) Printer 4.425 m (14ft 6.21 in) 4.21 (13ft 9.75 in) 5.320 m (17ft 5.45 in) 5.1 m (16ft 8.79 in) HP Latex R1000 Printer (64") 2.192 m (7ft 2.3 in) 2.150 m (7ft 0.65 in) 2.04 m (6ft 8.31 in) 1.747 m (5ft 8.78 in) HP Latex R2000 Printer (98") 2.192 m (7ft 2.3 in) 2.150 m (7ft 0.65 in) 2.04 m (6ft 8.31 in) 1.747 m (5ft 8.78 in) 2400 kg (5291 lb) 1400 kg (3086 lb) 2800 kg (6173 lb) 1600 kg (3527 lb) Tools and manpower required for installation The installation process requires 5 capable people if ramps are used. If a forklift is used, only 2 people are needed, usually the installer and the operator. Additionally, a certified electrician is required to configure the electrical system. Check with the installation specialist before delivery to make sure you do not have to supply any tools. Moving equipment Ground floor installation It is highly recommended to lower the printer with the ramps as indicated in the installation guide. In exceptional cases, where ramps cannot be used due to a physical barrier, follow the alternative instructions indicated carefully. CAUTION: Unloading and moving the printer and all system components is the customer's responsibility and not HP's. Failure to provide the required moving and lifting apparatus could result in personal injury or damage the printer during installation. Lower the printer with ramps ● Minimum room space to lower 5.2 m beside the crate, 8.2 m total ● Minimum manpower: 5 people ● Flat floor or max 3% inclination The recommended way to lower the printer is by using the ramps provided. If this is not possible, you can use a forklift to lower the printer. The use of specialist moving and lifting equipment is required during the unloading, unpacking, and installation of your printer. Advanced booking for the services of a machinery moving contractor/rigger must be made. It is important to confirm that the hired moving specialist and moving equipment will be available when the printer is delivered. The following equipment is recommended: ● Wide, heavy-duty forklift (required) 22 Chapter 3 Shipment arrival preparation ENWW