HP Mini 100e HP Mini 100e Education Edition - Maintenance and Service Guide - Page 56
CAUTION, that secure
View all HP Mini 100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
3. Remove the WLAN antenna from the routing channel (3) on the system board. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other device components. 4. Remove the 2 Phillips 2.0×4.0 screws (1) and the Phillips 2.0x5.5 screw (2) that secure the display assembly to the computer. 5. Remove the display assembly (3). 48 Chapter 4 Removal and replacement procedures
3.
Remove the WLAN antenna from the routing channel
(3)
on the system board.
CAUTION:
Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other device
components.
4.
Remove the 2 Phillips 2.0×4.0 screws
(1)
and the Phillips 2.0x5.5 screw
(2)
that secure the
display assembly to the computer.
5.
Remove the display assembly
(3)
.
48
Chapter 4
Removal and replacement procedures