HP Mini 1117TU HP Mini 1000 Netbook - Maintenance and Service Guide - Page 56
was disconnected earlier see, The USB board pass-through cable
View all HP Mini 1117TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2. Disconnect the following cables from the system board: (1) Speaker cables (2) Microphone cable (3) Fan cable (4) Power cable (5) Display panel cable NOTE: The USB board pass-through cable was disconnected earlier (see Mass storage devices on page 37). 3. Remove the two Phillips PM1.6×2.5 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board, and then remove the actuators (2). NOTE: The actuators are included in the Bracket Kit, spare part number 507318-001. 48 Chapter 4 Removal and replacement procedures
2.
Disconnect the following cables from the system board:
(1)
Speaker cables
(2)
Microphone cable
(3)
Fan cable
(4)
Power cable
(5)
Display panel cable
NOTE:
The USB board pass-through cable
was disconnected earlier (see
Mass storage
devices
on page
37
).
3.
Remove the two Phillips PM1.6×2.5 screws
(1)
that secure the actuators for the power switch and
wireless on/off switch to the system board, and then remove the actuators
(2)
.
NOTE:
The actuators are included in the Bracket Kit, spare part number 507318-001.
48
Chapter 4
Removal and replacement procedures