HP Mini 210-3001xx HP Mini 110 and Compaq Mini CQ10 User Guide Linux - Page 56
Memory modules, Unplug the power cord from the AC outlet and remove the battery see
View all HP Mini 210-3001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
9 Memory modules The computer has one memory module compartment. The capacity of the computer can be upgraded by upgrading the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are discharged of static electricity by touching a grounded metal object. To replace the memory module: CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before replacing the memory module. Do not remove the memory module while the computer is on, in the Suspend state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. 1. Save your work and shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Unplug the power cord from the AC outlet and remove the battery (see Removing the battery on page 32). 4. Remove the service door (see Replacing or upgrading the hard drive on page 38). 5. Remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. 46 Chapter 9 Memory modules