HP Nc4010 HP Compaq nc4010 Notebook PC - Maintenance and Service Guide - Page 140
If the modem board cable must be replaced, remove the, Remove the modem board.
![]() |
View all HP Nc4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Removal and Replacement Procedures 2. Turn the system board upside down with the rear panel facing toward you. 3. Disconnect the modem board cable 1 from the modem board. 4. Remove the two PM2.0×3.0 screws 2 that secure the modem board to the system board. 5. Lift the rear edge of the modem board 3 to disconnect it from the system board. 6. Remove the modem board. 7. If the modem board cable must be replaced, remove the tape 4 that secures the cable to the system board and disconnect the cable 5 from the system board. ✎ The modem cable is included with the modem board and is also included in the Miscellaneous Plastics Kit, spare part number 325528-001. Removing the Modem Board Reverse the above procedure to install the modem board. Maintenance and Service Guide 5-61
![](/manual_guide/products/hewlettpackard-nc4000-hp-compaq-nc4010-notebook-pc-maintenance-service-guide-c978250/140.png)