HP Neoware e90 TeemTalk® 5.0 for Unix User's Guide - Page 207

IBM 5250 Emulation 14 IBM 5250 Emulation This chapter describes features of the IBM 5250 terminal emulation. Introduction The IBM 5250 emulator provides emulation of 5250 type alphanumeric terminals, both monochrome (green/white plus attributes) and colour. Colours may be modified using the Attribute Settings dialog box. This emulation can be used for connection to an IBM AS/400, System/36 or System/38. A typeahead capability is provided so that you can continue to enter data without waiting for a prompt from the host. All communication to the IBM mainframe is achieved over the TCP/IP Telnet interface using the inbuilt telnet interface provided with TeemTalk. Running The Emulation 1. Display the Emulation Settings dialog box, set the Alpha Emulation option to IBM5250, then click the OK button. The TeemTalk window will now be in Network Virtual Terminal mode until a successful host connection is made. 2. Display the IBM 5250 Settings dialog box and select the Model. This specifies what is reported back to the host in response to a terminal identification request. (Note that not all features of the specified terminal may be supported.). It also allows you to specify whether the display is treated as monochrome (green for normal characters, white for intense attribute) or colour for attributes. The terminal types currently supported and their display characteristics are listed below. Type 5291_1 5292_2 5251_11 3179_2 3196_A1 Display Monochrome Colour Monochrome Colour Monochrome Rows x Columns 24 x 80 24 x 80 24 x 80 24 x 80 (default) 24 x 80 14-1