HP Neoware e90 TeemTalk® 5.0 for Unix User's Guide - Page 208

IBM 5250 Emulation 3180_2 3477_FC 3477_FG 3486_BA 3487_HA 3487_HC Monochrome Colour Monochrome Monochrome Monochrome Colour 24 x 80 and 27 x 132 24 x 80 and 27 x 132 24 x 80 and 27 x 132 24 x 80 24 x 80 24 x 80 The printer types supported are listed below: 3812-1 Single byte printer 3. Select Open Telnet in the File menu. Specify the name of the host to which connection is to be made then click Ok. (Refer to the Setup Menus chapter for a description of the Open Telnet dialog box). 4. If necessary, enter the appropriate information to establish an IBM host session in the Network Virtual Terminal mode screen. 5. When an IBM host session has been established, the screen will switch out of Network Virtual Terminal mode and display the IBM 5250 emulation screen. Note: You will be returned to the Network Virtual Terminal screen when the connection to the IBM host has been closed. Network Virtual Terminal Mode Network Virtual Terminal (NVT) mode allows the operator to communicate with a network gateway (in ASCII) for routing, logon etc, before the full IBM terminal emulation protocol is established. NVT mode is indicated by the absence of the symbol in the status line along the bottom of the window. NVT mode displays an unformatted screen for data entry, allowing basic keyboard functionality as a simple ASCII terminal. In addition to data keys, other recognized keys are: Clear Enter Newline Backspace Tab clears the screen sends a CR to the host sends a CR to the host sends a BS to the host sends an HT to the host Once the appropriate details have been entered to establish an IBM host session (which may be automatic), the screen is cleared and switched into full IBM 5250 terminal emulation mode, as indicated by the symbol in the status line. 14-2