HP NetServer AA 6200 HP Netserver AA Solution Administrator's Guide v - Page 104

CE Show Auto Synch This command shows the state of the Auto Synch parameter for a specific CE. Auto Synch allows the CE to automatically synchronize with the other CE after a reboot. If you disable Auto Synch, you cannot synchronize that CE until you issue a CE Enable Auto Synch command. By default, Auto Synch is true (enabled). Command CEn Show Auto Synch From IOPx Console Syntax MTCCONS CEn Show Auto Synch From IOPx Variables n - the ID number of the CE (1 or 2) x - the ID number of the IOP (1 or 2) Results The value for Auto Synch is displayed as either: true (enabled) or false (disabled). For an example of the results of this command, refer to CE Show Parameters (5-16). See Also CE Disable Auto Synch CE Enable Auto Synch CE Show Parameters CE Show Parameters This command displays the current parameter settings for CEn. Command CEn Show Parameters From IOPx Console Syntax MTCCONS CEn Show Parameters -V From IOPx Variables n - the CE's ID number (1 or 2) Results 5-16 HP Netserver AA Solution Administrator's Guide