HP NetServer LP 1000r HP Netserver Ultra3 SCSI HBA Guide - Page 67
Using the NetWare Tape Backup, Using a CD-ROM with NetWare
View all HP NetServer LP 1000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Using the NetWare Tape Backup Included with Novell NetWare is a server-based tape backup utility called sbackup.nlm. This utility allows you to backup server disk drives to a server tape drive. The utility supports HP host adapters. Novell NetWare documentation contains instructions for loading the server backup software. Refer to the NetWare Server Backup Manual to load the tapedai, tsa, and sbackup modules. 1. Once you have loaded adpt160m.ham, load tsaxxx.nlm (tsa312.nlm, tsa400.nlm, tsa410.nlm) and sbackup with these options: :load scsi2tp.cdm :load tsaxxx :load sbackup The appropriate driver that interfaces sbackup to ASPI is loaded automatically. 2. When sbackup is loaded, it asks for a login name. Enter the appropriate name. 3. If sbackup asks you to select the device driver, select the HP DIBI-2 Tape Driver, regardless of the type of SCSI tape drive being attached (e.g., even if the tape drive is manufactured by Wangtek, do not select the Wangtek driver). Novell publishes a list of SCSI tape drives supported by sbackup.nlm. Using a CD-ROM with NetWare To use a CD-ROM with NetWare, follow these instructions: 1. Load adpt160m.ham by entering the following line: :load [pathname]adpt160m 2. The scsicd.cdm driver will auto-load if the device(s) are detected. 61