HP NetServer LXr Pro8 HP Netserver LPr NetRAID-4M Config Guide for Windows 20 - Page 1
HP NetServer LXr Pro8 Manual
View all HP NetServer LXr Pro8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP NetServer LPr with NetRAID-4M (HP Rack Storage/12) Windows® 2000 Advanced Server Cluster Configuration Guide 27 March 2001 (see Versions at the end of this document) Introduction This document defines the configurations that Hewlett-Packard supports for the HP NetServer LPr, HP Rack Storage/12 and Microsoft® Cluster Server. These configurations minimize single points of failure (SPOF) and provide extended availability. The specific configuration certified and supported by both Hewlett-Packard and Microsoft® is defined, as are other guidelines to assist you in configuring your clustered NetServers. This guide is prescriptive; it describes the configurations supported by HP. Any deviance to these configurations can result in an inoperative cluster or an operating cluster with degraded performance, hidden SPOFs, etc., and therefore will not be supported by HP. What's Defined in a Cluster •Cluster •SPUs •Local and Shared Storage •Intra-cluster and Client LANs •Shared Storage Cabling Cluster Type of SPUs Number of nodes Shared Storage LANs: Client LAN Intra-cluster (Heartbeat) LAN HP NetServer LPr Each node must be the same SPU, but may have different clocks speeds, main memory sizes, cache sizes, and number of CPUs. 2 HP Rack Storage/12 with HP NetRAID-4M controller and HP disks. See Shared Storage below. Any NIC that is HP and Microsoft® approved. See Client LAN below. Embedded NIC with crossover cable or equivalent. See Intra-cluster LAN below. 1