HP P1005 HP LaserJet P1000 and P1500 Series - User Guide - Page 79
Improve print quality, Light print or faded, Toner specks, Dropouts
UPC - 883585164172
View all HP P1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Improve print quality This section provides information about identifying and correcting print defects. NOTE: If these steps do not correct the problem, contact an HP-authorized dealer or service representative. Light print or faded ● The print cartridge is nearing end of life. ● The media might not meet Hewlett-Packard's media specifications (for example, the media is too moist or too rough). ● If the whole page is light, the print density adjustment is too light or EconoMode might be turned on. Adjust the print density, and disable EconoMode in the printer Properties. Toner specks ● The media might not meet Hewlett-Packard's media specifications (for example, the media is too moist or too rough). ● The device might need to be cleaned. See Clean the device on page 47 Dropouts ● A single sheet of media might be defective. Try reprinting the job. ● The media moisture content is uneven or the media has moist spots on its surface. Try printing with new media. ● The media lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different type or brand of media. ● The print cartridge might be defective. ENWW Improve print quality 69