HP P6000 HP StorageWorks Disk enclosure front power UID interconnect board rep - Page 1
HP P6000 Manual
![]() |
View all HP P6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP StorageWorks Disk enclosure front power UID interconnect board replacement instructions About this document For the latest documentation, go to http://www.hp.com/support/ manuals, and select your product. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. WARRANTY STATEMENT: To obtain a copy of the warranty for this product, see the warranty information website: http://www.hp.com/ go/storagewarranty. This document details the procedures for replacing a failed power UID (Unit ID) module in an HP storage enclosure. Before you begin Observe the following precautions when replacing a module. CAUTION: Parts can be damaged by electrostatic discharge. Use proper anti-static protection. Refer to the documentation that shipped with your system for additional information. © Copyright 2009 Hewlett-Packard Development Company, L.P. First edition: June 2009 The information in this document is subject to change without notice. Printed in the US www.hp.com NOTE: Illustrations in this document may show modules or a chassis that differ from your device. However, replacement procedures are the same for all chassis that use this component. *504216-001* Page 1
![](/manual_guide/products/hewlettpackard-p6000-hp-storageworks-disk-enclosure-power-uid-interconnect-board-replacement-instructions-504216001-2009-6930e21/1.png)