HP P6300 HP EVA Updating Product Software Guide (xcs10001000) (5697-2423, Dece - Page 27
IBM AIX, Linux Red Hat and SUSE, Checking or changing timeouts, Configuration recommendations
View all HP P6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
IBM AIX Checking or changing timeouts AIX requires the disk settings shown in Table 5 (page 27) for the native multipath drives. Table 5 IBM AIX timeout settings Setting PR_key_value Algorithm hcheck_interval hcheck_mode queue_depth reserve_policy rw_timeout Value not applicable fail_over 60 nonactive 8 single_path 60 Description Sets the key value for persistent reservations. Persistent reservations are not supported. Sets the load balancing algorithm to fail_over. All I/O uses a single path; the remaining paths are in standby mode. The value round_robin is not supported. Sets the path health-check feature to check each device every 60 seconds. Specifies the I/O paths monitored by the path health-check feature. The value nonactive checks all I/O paths for Failed status, and checks standby paths for Used/Opened devices. Sets the queue depth. Sets the reserve policy to standard SCSI-2 reservations. Sets the read/write timeout to 60 seconds. Linux Red Hat and SUSE NOTE: The RHEL 4/SLES 9 SCSI device has a default 30-second timeout value with up to 5 retries. The RHEL 5/SLES 10 SCSI device has a default 60-second timeout with up to 5 retries. In general, these timeout periods are sufficient for an online controller software upgrade. Native Linux Device-Mapper Multipath If you are using Native Linux Device-Mapper Multipath, see the Native Linux Device-Mapper Multipath for HP StorageWorks Disk Arrays reference guide for additional configuration details. The document is located on the Single Point of Connectivity Knowledge website: http://www.hp.com/storage/spock In the left navigation pane, select Solutions: Linux under Application Notes. Configuration recommendations Table 6 QLogic driver parameters Parameter qdepth port_down_retry_count login_retry_count failover load_balancing excludemodel auto_restore Failover enabled 16 30 30 1 1 0x0 0xA0 Single path 16 64 30 0 1 0x0 0xA0 Managing host I/O timeouts for an online upgrade 27