HP PageWide Managed P75050 On-Site Installation Guide - Page 66
Perform a firmware upgrade, Firmware upgrade using a USB flash drive, drive
View all HP PageWide Managed P75050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Determine the installed revision of firmware (small touchscreen) 1. From the Home screen on the printer control panel, scroll to and touch the Support Tools button. 2. Open the following menus: ● Maintenance 3. Touch the Setup button (located at the lower left corner of the display). 4. Touch the System Information item. 5. Find the firmware version in the list that appears on the control-panel display. Touch Done to return to the Troubleshooting sub menu, or use the Back button or Home button to return to the main menu. Perform a firmware upgrade Following are the types of firmware upgrade files available: ● EXE file: When this file is opened, the user selects the printer to be upgraded, and the program installs the upgrade firmware on that printer. ● FUL2 file: This file is copied to the root directory of a USB flash drive. The flash drive is inserted into the USB port on the printer, which automatically detects the upgrade firmware. The printer prompts the user to upgrade the firmware. Firmware upgrade using a USB flash drive IMPORTANT: When the upgrade is complete, verify that the upgrade firmware version was installed. See Determine the installed revision of firmware on page 61. NOTE: USB flash drives that are not using a FAT32 format, or do not have a CD formatted partition, might not be recognized by the printer. If the printer does not recognize a USB flash drive, try using a different USB flash drive. If the firmware version on the USB flash drive is the same as the version already installed on the printer, nothing happens when a USB flash drive firmware upgrade is attempted. The USB flash drive firmware upgrade process takes 5 to 7 minutes to complete. 1. Copy the .FUL2 file to a portable USB flash drive. TIP: There should not be more than one .FUL2 file on the storage device. 2. Turn the printer on, and then wait until it initializes (the Home screen displays on the control panel). 3. Insert the USB flash drive in the USB port on the printer. 4. The Memory Device Options screen appears on the control-panel display. 5. Touch Update Now. 6. The printer automatically downloads the firmware file from the USB flash drive, and the following process initiates: ● A rotating circle appears on the control-panel display. ● The printer start up screen appears on the control-panel display. 62 Chapter 5 On-site setup ENWW