HP Pavilion 13-b000 Pavilion 13 Notebook PC Maintenance and Service Guide - Page 38
Before removing the disassembling, follow these steps
View all HP Pavilion 13-b000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Before removing the disassembling, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. NOTE: When replacing the keyboard/top cover, be sure that the TouchPad assembly (see TouchPad on page 33) and power button board (see Power button board on page 34) are removed from the defective keyboard/top cover and installed on the replacement keyboard/top cover: Remove the keyboard/top cover: 1. Close the computer. 2. Turn the computer upside down with the front toward you. 3. Remove the two screw covers (1) from the rear edge of the computer. 4. Remove the two computer rear feet (2). 5. Remove the two screw covers (3) from the middle of the computer. The screw covers and the computer rear feet are included in the Rubber Kit, spare part number 768044-001. 30 Chapter 5 Removal and replacement procedures