HP Pavilion 13-b000 Pavilion 13 Notebook PC Maintenance and Service Guide - Page 51

Display assembly

Get HP Pavilion 13-b000 PDF manuals and user guides View all HP Pavilion 13-b000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Remove the speakers: 1. Disconnect the speaker cable (1) from the audio/USB board. 2. Release the speakers cables from the retention clips (2) built into the bottom cover. 3. Remove the two Phillips PM2.4×5.7 screws (3) that secure the right speaker to the bottom cover. 4. Remove the speakers (4). Reverse this procedure to install the speakers. Display assembly NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 29). 5. Disconnect the battery cable from the system board (see Battery on page 35). Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Remove the speakers:
1.
Disconnect the speaker cable
(1)
from the audio/USB board.
2.
Release the speakers cables from the retention clips
(2)
built into the bottom cover.
3.
Remove the two Phillips PM2.4×5.7 screws
(3)
that secure the right speaker to the bottom cover.
4.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
Display assembly
NOTE:
The display assembly is spared at the subcomponent level only. For display assembly spare
part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
29
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
35
).
Component replacement procedures
43