HP Pavilion 13-r030ca HP Pavilion x2 Detachable Notebook PC HP Split x2 Detach - Page 44
Power connector, Disconnect the power connector cable from the I/O board
View all HP Pavilion 13-r030ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Power connector Description Power connector Spare part number 765975-001 Before removing the power connector, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 25). 5. Remove the dock bottom cover (see Dock bottom cover on page 26). 6. Disconnect the battery cable (see Battery cable on page 28). Remove the power connector: 1. Disconnect the power connector cable from the I/O board (1). 2. Remove the cable from its routing path on the bottom of the dock (2). 3. Remove the Phillips PM2.5×4.0 screw (3) that secures the power connector bracket to the dock. 4. Remove the bracket from atop the connector (4), and then remove the power connector cable from the dock (5). Reverse this procedure to install the power connector. 34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts