HP Pavilion 14-n000 Maintenance and Service Guide - Page 94
Remove the 2 Phillips M2.5×5.0 screws
View all HP Pavilion 14-n000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
2. Remove the Phillips PM2.5×6.5 screw (1) that secures the power connector bracket to the base enclosure. Remove the power connector bracket (2). 3. Remove the 2 Phillips M2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift the right side of the system board (2) until it rests at an angle. 84 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
2.
Remove the Phillips PM2.5×6.5 screw
(1)
that secures the power connector bracket to
the base enclosure. Remove the power connector bracket
(2)
.
3.
Remove the 2 Phillips M2.5×5.0 screws
(1)
that secure the system board to the base enclosure.
4.
Lift the right side of the system board
(2)
until it rests at an angle.
84
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts