HP Pavilion 15-ab000 Pavilion Notebook AMD Maintenance and Service Guide 1 - Page 65

and the two Phillips PM2.0×3.0 screws, display assembly to the computer.

Get HP Pavilion 15-ab000 PDF manuals and user guides View all HP Pavilion 15-ab000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 29). 5. Remove the optical drive (see Optical drive on page 30). 6. Remove the bottom cover (see Bottom cover on page 34). 7. Remove the system board (see System board on page 48). To remove the display assembly: 1. Position the computer on its side, partially open. 2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer. 3. Open the display to rotate the hinges upward to an angle (2). 4. Separate the display assembly from the computer (3). If it is necessary to replace any of the display assembly subcomponents: 1. To remove the display bezel: a. Remove the two screw covers (1) and the two Phillips PM2.0×3.0 screws (2) that secure the display assembly to the computer. b. Flex the inside of the top edge (3), the left and right edges (4), and the bottom edge (5) of the display bezel until the bezel disengages from the display enclosure. c. Disengage the double-sided tape located in the middle, bottom of the bezel (under the logo) (6). Component replacement procedures 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
29
).
5.
Remove the optical drive (see
Optical drive
on page
30
).
6.
Remove the bottom cover (see
Bottom cover
on page
34
).
7.
Remove the system board (see
System board
on page
48
).
To remove the display assembly:
1.
Position the computer on its side, partially open.
2.
Remove the two Phillips PM2.5×5.0 screws
(1)
that secure the display assembly to the computer.
3.
Open the display to rotate the hinges upward to an angle
(2)
.
4.
Separate the display assembly from the computer
(3)
.
If it is necessary to replace any of the display assembly subcomponents:
1.
To remove the display bezel:
a.
Remove the two screw covers
(1)
and the two Phillips PM2.0×3.0 screws
(2)
that secure the
display assembly to the computer.
b.
Flex the inside of the top edge
(3)
, the left and right edges
(4)
, and the bottom edge
(5)
of the
display bezel until the bezel disengages from the display enclosure.
c.
Disengage the double-sided tape located in the middle, bottom of the bezel (under the logo)
(6)
.
Component replacement procedures
57