HP Pavilion 27-inch Displays User Guide 3 - Page 15

Mounting the monitor The monitor head can be attached to a wall, swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by UL- or CSA-Listed wall-mount bracket. CAUTION: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a thirdparty mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm-long screws are required. Longer screws may damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor head. For best performance, use the power and video cables provided with the monitor. Removing the monitor stand CAUTION: Before beginning to disassemble the monitor, be sure that the monitor is turned off and all cables are disconnected. 1. Disconnect and remove all cables from the monitor. 2. Position the monitor head facedown on a flat surface covered by a clean, dry cloth. 3. Push the base down toward the flat surface (1). 4. Remove the plastic cap from the neck of the stand (2). 5. Remove the screw from the neck of the stand (3) using the hexagonal wrench (included). 6. Remove the stand from the monitor head. Setting up the monitor 9