HP Pavilion 27-inch Displays User Guide 3 - Page 16
Attaching the monitor to a mounting device, IMPORTANT
View all HP Pavilion 27-inch Displays manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Attaching the monitor to a mounting device 1. Remove the monitor head from the stand. For detailed instructions, see Removing the monitor stand on page 9. 2. Insert the tab at the bottom of the VESA bracket into the slot on the back of the monitor head (1), and then tighten the screw (2). 3. Attach the monitor to the wall or swing arm of your choice by inserting four mounting screws through the holes on the mounting device and into the screw holes on the VESA bracket that was installed on the back of the monitor. IMPORTANT: Follow the mounting device manufacturer's instructions when mounting the monitor to a wall or swing arm. 10 Chapter 1 Getting started
Attaching the monitor to a mounting device
1.
Remove the monitor head from the stand. For detailed instructions, see
Removing the monitor stand
on page
9
.
2.
Insert the tab at the bottom of the VESA bracket into the slot on the back of the monitor head (1), and
then tighten the screw (2).
3.
Attach the monitor to the wall or swing arm of your choice by inserting four mounting screws through
the holes on the mounting device and into the screw holes on the VESA bracket that was installed on the
back of the monitor.
IMPORTANT:
Follow the mounting device manufacturer’s instructions when mounting the monitor to a
wall or swing arm.
10
Chapter 1
Getting started