HP Pavilion 27-inch Displays User Guide - Page 12
Mounting the monitor head, Removing the monitor stand
![]() |
View all HP Pavilion 27-inch Displays manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Mounting the monitor head The monitor head can be attached to a wall, swing arm, or other mounting fixture. IMPORTANT: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a thirdparty mounting solution to the monitor head, four 4 mm, 0.7 pitch, and 10 mm long screws are required. Longer screws might damage the monitor head. Be sure to verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor head. For best performance, use the power and video cables provided with the monitor. NOTE: This apparatus is intended to be supported by a UL- or CSA-Listed wall-mount bracket. Removing the monitor stand You can remove the monitor head from the stand to install the monitor head on a wall, a swing arm, or other mounting fixture. IMPORTANT: Before disassembling the monitor, be sure that the monitor is turned off and all cables are disconnected. 1. Disconnect and remove all cables from the monitor. 2. Place the monitor facedown inside the original packing box. 3. Loosen the thumbscrew under the base of the monitor stand (1), and remove the base from the stand (2). 6 Chapter 1 Getting started
![](/manual_guide/products/hewlettpackard-x20-user-guide-9b97662/12.png)