HP Pavilion 27-inch Displays User Guide - Page 17

3. Swivel the monitor head to the left or right for the best viewing angle. Turning on the monitor IMPORTANT: Burn-in image damage may occur on monitors that display the same static image on the screen for 12 or more consecutive hours. To avoid burn-in image damage, you should always activate a screen saver application or turn off the monitor when it will not be in use for a prolonged period of time. Image retention is a condition that can occur on all LCD screens. Burn-in damage on the monitor is not covered under the HP warranty. NOTE: If pressing the power button has no effect, the Power Button Lockout feature might be enabled. To disable this feature, press and hold the monitor power button for 10 seconds. NOTE: You can disable the power light in the OSD menu. Press the Menu button to open the OSD, and then select Power, select Power LED, and then select Off. 1. Press the power button on the computer to turn it on. 2. Press the power button on the bottom of the monitor to turn it on. When the monitor is first turned on, a monitor status message appears on the screen for 5 seconds. The message shows which input is the current active signal, the status of the auto-switch source setting (On or Setting up the monitor 11