HP Pavilion 32-inch Displays User Guide - Page 17
Attaching the monitor head to a mounting device, IMPORTANT
![]() |
View all HP Pavilion 32-inch Displays manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Attaching the monitor head to a mounting device 1. Remove the monitor head from the stand. See Removing the monitor stand on page 10. 2. Insert the tab at the bottom of the VESA bracket into the slot on the back of the monitor head (1), and then tighten the screw (2). IMPORTANT: Follow the mounting device manufacturer's instructions when mounting the monitor to a wall or swing arm. 3. Attach the monitor to the wall or swing arm of your choice by inserting four mounting screws through the holes on the mounting device and into the screw holes on the VESA bracket that was installed on the back of the monitor. Setting up the monitor 11
![](/manual_guide/products/hewlettpackard-pavilion-32inch-displays-user-guide-611a493/17.png)
Attaching the monitor head to a mounting device
1.
Remove the monitor head from the stand. See
Removing the monitor stand
on page
10
.
2.
Insert the tab at the bottom of the VESA bracket into the slot on the back of the monitor head (1), and
then tighten the screw (2).
IMPORTANT:
Follow the mounting device manufacturer’s instructions when mounting the monitor to a
wall or swing arm.
3.
Attach the monitor to the wall or swing arm of your choice by inserting four mounting screws through
the holes on the mounting device and into the screw holes on the VESA bracket that was installed on the
back of the monitor.
Setting up the monitor
11