HP Pavilion g3100 Upgrading and Servicing Guide - Page 15

Removing the HP Pocket Media Drive Bay, Diskette, or Hard Disk Drive

Page 15 highlights

A B MASTER C SLAVE To CPU A - Connect to a primary hard disk drive. B - Connect to a secondary hard disk drive. C - Connect to the PC motherboard. 7 Push the drive all the way in through the front of the chassis until it locks into place with the drive latch pin fully inserted into the hole labeled (1) on the chassis. 8 Complete the procedures to replace the front panel, replace the side panel, and close the PC. See "Opening and Closing the PC" on page 1. Removing the HP Pocket Media Drive Bay, Diskette, or Hard Disk Drive 1 Complete the procedures to prepare the PC to remove the side panel and to remove the front panel. See "Opening and Closing the PC" on page 1. 2 Release the HP Pocket Media Drive bay, diskette (floppy), or hard disk drive, by removing the two screws on the side of the drive, and then slide the drive part way out of the front of the chassis. Upgrading and Servicing Guide 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Upgrading and Servicing Guide
11
A
Connect to a primary hard disk drive.
B
Connect to a secondary hard disk drive.
C
Connect to the PC motherboard.
7
Push the drive all the way in through the front of the chassis until it locks into place
with the drive latch pin fully inserted into the hole labeled (
1
) on the chassis.
8
Complete the procedures to replace the front panel, replace the side panel, and close
the PC. See “Opening and Closing the PC” on page 1.
Removing the HP Pocket Media Drive Bay,
Diskette, or Hard Disk Drive
1
Complete the procedures to prepare the PC to remove the side panel and to remove
the front panel. See “Opening and Closing the PC” on page 1.
2
Release the HP Pocket Media Drive bay, diskette (floppy), or hard disk drive, by
removing the two screws on the side of the drive, and then slide the drive part way out
of the front of the chassis.
To CPU
SLAVE
MASTER
A
B
C