HP Pavilion tx2000 HP Pavilion tx2000 Entertainment PC - Maintenance and Servi - Page 46

Hard drive, and swing it to right.

Get HP Pavilion tx2000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion tx2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Hard drive Description Spare part number 5400-rpm, 320-GB 463643-002 5400-rpm, 250-GB 457061-002 5400-rpm, 160-GB 441128-002 5400-rpm, 120-GB 441127-002 Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector, and hard drive screws) 463644-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the computer. 3. Lift the left side of the hard drive cover (2) and swing it to right. 4. Remove the hard drive cover. NOTE: The hard drive cover is included in the Plastics Kit, spare part number 464114-001. 5. Grasp the Mylar tab (1) on the hard drive and lift the hard drive to disconnect it from the system board. 38 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Hard drive
Description
Spare part number
5400-rpm, 320-GB
463643-002
5400-rpm, 250-GB
457061-002
5400-rpm, 160-GB
441128-002
5400-rpm, 120-GB
441127-002
Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector, and hard drive screws)
463644-001
Before removing the hard drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery
on page
36
).
Remove the hard drive:
1
.
Position the computer with the front toward you.
2
.
Loosen the two Phillips PM2.0×5.0 captive screws
(1)
that secure the hard drive cover to the
computer.
3
.
Lift the left side of the hard drive cover
(2)
and swing it to right.
4
.
Remove the hard drive cover.
NOTE:
The hard drive cover is included in the Plastics Kit, spare part number 464114-001.
5
.
Grasp the Mylar tab
(1)
on the hard drive and lift the hard drive to disconnect it from the system
board.
38
Chapter
4
Removal and replacement procedures