HP Pavilion tx2000 HP Pavilion tx2000 Entertainment PC - Maintenance and Servi - Page 59
Display assembly, Remove the display assembly - screen replacement
View all HP Pavilion tx2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Display assembly Description Spare part number 12.1-inch, WXGA, BrightView touch-screen display assembly with Web camera, fingerprint reader, microphones, and WLAN antenna cables 12.1-inch, WXGA, BrightView touch-screen display assembly with Web camera, microphones, and WLAN antenna cables 464144-001 464142-001 12.1-inch, WXGA, BrightView touch-screen display assembly with fingerprint reader, microphones and 464145-001 WLAN antenna cables 12.1-inch, WXGA, BrightView touch-screen display assembly with microphones and WLAN antenna 464143-001 cables Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). 5. Remove the memory module compartment cover (see Memory module on page 41). 6. Remove the WLAN module compartment cover and disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 43). 7. Remove the keyboard (see Keyboard on page 47). 8. Remove the switch cover (see Switch cover on page 49). Remove the display assembly: 1. Close the computer and turn it upside down, with the front toward you. 2. Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the display connector cover to the computer. 3. Lift the rear edge of the display connector cover (2) and swing it toward you. 4. Remove the display connector cover. NOTE: The display connector cover is included in the Plastics Kit, spare part number 464114-001. Component replacement procedures 51