HP Pavilion tx2000 HP Pavilion tx2000 Entertainment PC - Maintenance and Servi - Page 49

Memory module, and swing it to the right.

Get HP Pavilion tx2000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion tx2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Memory module Description 2048-MB (1-DIMM, PC2-5300, 667 MHz) 1024-MB (1-DIMM, PC2-5300, 667 MHz) 512-MB (1-DIMM, PC2-5300, 667 MHz) Spare part number 455454-002 441406-002 441405-002 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). Remove the memory module: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the memory module compartment cover to the computer. 3. Lift the left side of the cover (2) and swing it to the right. 4. Remove the memory module compartment cover. NOTE: The memory module compartment cover is included in the Plastics Kit, spare part number 464114-001. 5. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Memory module
Description
Spare part number
2048-MB (1-DIMM, PC2-5300, 667 MHz)
455454-002
1024-MB (1-DIMM, PC2-5300, 667 MHz)
441406-002
512-MB (1-DIMM, PC2-5300, 667 MHz)
441405-002
Before removing the memory module, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery
on page
36
).
Remove the memory module:
1
.
Position the computer with the front toward you.
2
.
Loosen the two Phillips PM2.0×5.0 captive screws
(1)
that secure the memory module compartment
cover to the computer.
3
.
Lift the left side of the cover
(2)
and swing it to the right.
4
.
Remove the memory module compartment cover.
NOTE:
The memory module compartment cover is included in the Plastics Kit, spare part number
464114-001.
5
.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
Component replacement procedures
41