HP Pavilion tx2000 HP Pavilion tx2000 Entertainment PC - Maintenance and Servi - Page 69
to lift the left side of the system board, Use the optical drive connector
View all HP Pavilion tx2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
2. Remove the ExpressCard slot bezel (2) from the ExpressCard slot. NOTE: The ExpressCard slot bezel is included in the Plastics Kit, spare part number 464114-001. 3. Release the ZIF connector (1) to which the audio/infrared board cable is connected and disconnect the audio/infrared board cable (2) from the system board. 4. Use the optical drive connector (1) to lift the left side of the system board (2) until the power connector (3) is clear of the base enclosure. Component replacement procedures 61
2
.
Remove the ExpressCard slot bezel
(2)
from the ExpressCard slot.
NOTE:
The ExpressCard slot bezel is included in the Plastics Kit, spare part number 464114-001.
3
.
Release the ZIF connector
(1)
to which the audio/infrared board cable is connected and disconnect
the audio/infrared board cable
(2)
from the system board.
4
.
Use the optical drive connector
(1)
to lift the left side of the system board
(2)
until the power
connector
(3)
is clear of the base enclosure.
Component replacement procedures
61