HP Pavilion x2 - 10-k077nr HP Pavilion x2 Detachable PC (model number 10-k0XX) - Page 27
Docking port board
View all HP Pavilion x2 - 10-k077nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Docking port board NOTE: The microphone spare part kit includes the cable. Description Docking port board (includes cable) Spare part number 784418-001 Before removing the docking port board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 19). Remove the docking port board: 1. Detach the docking port board cable (1) from the back cover. (The docking port board cable is attached to the back cover with double-sided adhesive.) 2. Remove the two Phillips PM1.9×3.3 screws (2) that secure the docking port board to the back cover. 3. Remove the docking port board (3) and cable. Reverse this procedure to install the docking port board. Docking port board 21