HP Pavilion zd7000 Expansion Base - Maintenance and Service Guide - Page 46

Expansion Cable

Get HP Pavilion zd7000 - Notebook PC PDF manuals and user guides View all HP Pavilion zd7000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Removal and Replacement Procedures 5.10 Expansion Cable Spare Part Number Information Expansion cable 347435-001 1. Prepare the Expansion Base for disassembly (Section 5.3). 2. Remove the base plate (Section 5.4). 3. Remove the upper chassis (Section 5.5). 4. Remove the front tray cover (Section 5.8). 5. Remove the back panel (Section 5.9). 6. Turn the upper chassis right-side up with the rear facing you. Rotate the chassis so that the expansion cable connector is facing away from you. 7. Remove the four PM2.0×2.0 screws 1 that secure the expansion cable clamps to the chassis. 8. Remove the expansion cable clamps 2 and the expansion cable 3. Removing the expansion cable clamps and expansion cable Reverse the above procedure to install the expansion cable. Maintenance and Service Guide 5-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Removal and Replacement Procedures
Maintenance and Service Guide
5–17
5.10 Expansion Cable
1. Prepare the Expansion Base for disassembly
(Section 5.3)
.
2. Remove the base plate
(Section 5.4)
.
3. Remove the upper chassis
(Section 5.5)
.
4. Remove the front tray cover
(Section 5.8)
.
5. Remove the back panel
(Section 5.9)
.
6. Turn the upper chassis right-side up with the rear facing you.
Rotate the chassis so that the expansion cable connector is
facing away from you.
7. Remove the four PM2.0×2.0 screws
1
that secure the
expansion cable clamps to the chassis.
8. Remove the expansion cable clamps
2
and the
expansion cable
3
.
Removing the expansion cable clamps and expansion cable
Reverse the above procedure to install the expansion cable.
Spare Part Number Information
Expansion cable
347435-001