HP Pavilion zv5000 Expansion Base - Maintenance and Service Guide - Page 41
System Board
View all HP Pavilion zv5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Removal and Replacement Procedures 5.7 System Board Spare Part Number Information System board 347437-001 1. Prepare the Expansion Base for disassembly (Section 5.3). 2. Remove the base plate (Section 5.4). 3. Remove the upper chassis (Section 5.5). 4. Remove the power supply (Section 5.6). 5. Position the base enclosure with the rear panel facing you. 6. Remove the three PM2.0×6.0 screws 1 that secure the system board to the base enclosure. 7. Use a 5.0-mm hex socket to remove the two HM5.0x9.0 standoffs 2 on either side of the serial connector. Removing the system board screws and standoffs 5-12 Maintenance and Service Guide
5–12
Maintenance and Service Guide
Removal and Replacement Procedures
5.7
System Board
1. Prepare the Expansion Base for disassembly
(Section 5.3)
.
2. Remove the base plate
(Section 5.4)
.
3. Remove the upper chassis
(Section 5.5)
.
4. Remove the power supply
(Section 5.6)
.
5. Position the base enclosure with the rear panel facing you.
6. Remove the three PM2.0×6.0 screws
1
that secure the
system board to the base enclosure.
7. Use a 5.0-mm hex socket to remove the two HM5.0x9.0
standoffs
2
on either side of the serial connector.
Removing the system board screws and standoffs
Spare Part Number Information
System board
347437-001