HP Pavilion zv5000 Expansion Base - Maintenance and Service Guide - Page 47

Speaker Assembly

Get HP Pavilion zv5000 - Notebook PC PDF manuals and user guides View all HP Pavilion zv5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Removal and Replacement Procedures 5.11 Speaker Assembly Spare Part Number Information Speaker assembly 347431-001 1. Prepare the Expansion Base for disassembly (Section 5.3). 2. Remove the base plate (Section 5.4). 3. Remove the upper chassis (Section 5.5). 4. Remove the front tray cover (Section 5.8). ✎ Although the back panel and expansion cable are not shown in the figure, it is not necessary to remove them. 5. Turn the upper chassis upside down, with the bottom facing you and the speaker assembly facing down. 6. Remove the 6-wire audio control cable 1 and the 4-wire speaker cable 2 from the chassis hole through which they are routed. 7. Remove the two PM2.0×4.0 screws 3 that secure the speaker assembly to the chassis. Removing the speaker assembly screws 5-18 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
5–18
Maintenance and Service Guide
Removal and Replacement Procedures
5.11 Speaker Assembly
1. Prepare the Expansion Base for disassembly
(Section 5.3)
.
2. Remove the base plate
(Section 5.4)
.
3. Remove the upper chassis
(Section 5.5)
.
4. Remove the front tray cover
(Section 5.8)
.
✎
Although the back panel and expansion cable are not shown in the
figure, it is not necessary to remove them.
5. Turn the upper chassis upside down, with the bottom facing
you and the speaker assembly facing down.
6. Remove the 6-wire audio control cable
1
and the 4-wire
speaker cable
2
from the chassis hole through which they are
routed.
7.
Remove the two PM2.0×4.0 screws
3
that secure the speaker
assembly to the chassis.
Removing the speaker assembly screws
Spare Part Number Information
Speaker assembly
347431-001