HP Presario CQ35-100 Compaq Presario CQ35 Notebook PC - Maintenance and Servic - Page 61
Disconnect the TouchPad cable, and routing channel through which it is routed.
View all HP Presario CQ35-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Removal and replacement procedures 3. Disconnect the left speaker cable 1 from the system board. 4. Remove the left speaker cable 2 from the clips and routing channel through which it is routed. 5. Disconnect the microphone cable 3 from the system board. 6. Disconnect the display panel cable 4 from the system board. 7. Remove the display panel cable from the clips 5 and routing channel through which it is routed. 8. Disconnect the TouchPad cable 1 from the LIF connector on the system board. 9. Disconnect the TouchPad on/off button board cable 2 from the LIF connector on the system board. 10. Disconnect the fingerprint reader board cable 3 from the system board. Maintenance and Service Guide 4-25
Removal and replacement procedures
Maintenance and Service Guide
4–25
3. Disconnect the left speaker cable
1
from the system board.
4. Remove the left speaker cable
2
from the clips and routing channel through which it is routed.
5. Disconnect the microphone cable
3
from the system board.
6. Disconnect the display panel cable
4
from the system board.
7. Remove the display panel cable from the clips
5
and routing channel through which it is routed.
8. Disconnect the TouchPad cable
1
from the LIF connector on the system board.
9. Disconnect the TouchPad on/off button board cable
2
from the LIF connector on the system board.
10. Disconnect the fingerprint reader board cable
3
from the system board.