HP Presario CQ62-a00 Compaq Presario CQ62 Notebook PC and HP G62 Notebook PC - - Page 60

Memory module, The mini-card compartment cover is included in the plastics

Get HP Presario CQ62-a00 - Notebook PC PDF manuals and user guides View all HP Presario CQ62-a00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Memory module Description 1 GB, 1066 MHz DDR3 2 GB, 1066 MHz DDR3 4 GB, 1066 MHz DDR3 Spare part number 598859-001 598856-001 599092-001 Before removing the memory module: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). Remove the memory module: 1. Turn the computer upside down with the front toward you. 2. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the mini-card compartment cover to the computer. 3. Lift the back side of the memory module cover (2) 4. Lift the cover off the computer (3). The mini-card compartment cover is included in the plastics kit, spare part number 606006-001. NOTE: Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs. 5. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 50 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Memory module
Description
Spare part number
1 GB, 1066 MHz DDR3
598859-001
2 GB, 1066 MHz DDR3
598856-001
4 GB, 1066 MHz DDR3
599092-001
Before removing the memory module:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
42
).
Remove the memory module:
1.
Turn the computer upside down with the front toward you.
2.
Loosen the two Phillips PM2.5×6.0 captive screws
(1)
that secure the mini-card compartment
cover to the computer.
3.
Lift the back side of the memory module cover
(2)
4.
Lift the cover off the computer
(3)
. The mini-card compartment cover is included in the plastics
kit, spare part number 606006-001.
NOTE:
Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.
5.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
50
Chapter 4
Removal and replacement procedures